Speaking of highlighting a sense of seniority, the ground material, a large area of the home that occupies one-sixth of the space, is the focus of attention when people decorate, and the advanced waterproof herringbone vinyl flooring is becoming increasingly popular. This article will take you through the installation of waterproof herringbone vinyl flooring and the difference between it and herringbone parquet.

1. The installation method of waterproof herringbone vinyl flooring.

(1) Ensure the ground is clean, dry, and flat before installation.

(2) When installing, the installer must communicate with the owner well and choose the most suitable plan according to the owner's preference.

(3) Herringbone laying method: first, cut off the positive mouth 45 degrees, then install the first floor, with the small end of the counter-port convex groove to the positive mouth groove 90 degrees assembled.

(4) waterproof herringbone vinyl flooring with a clapperboard and hammer to put the floor together to avoid gaps.

(5) After installing waterproof herringbone vinyl flooring, remove the temporary use of wooden dowels to ensure that there are expansion joints. Install skirting board underneath and the surface of the floor combined with compact.

(6) in the design of the keel with a geothermal pipe laid on the waterproof herringbone vinyl flooring, flooring straight to the diaphragm part must be laid on the keel, the width of the keel shall not be less than 45mm, each keel center interval shall not be greater than 300mm.

(7) waterproof herringbone vinyl flooring installation quality issues, in line with the principle of who is responsible for the installation, please the construction team in strict compliance with the construction procedures developed by the relevant companies and the national flooring installation regulations for installation to ensure the quality of the project.

2. The difference between waterproof herringbone vinyl flooring and herringbone parquet.

From the shape and decorative effect, herringbone parquet is a rectangular plate with two short sides according to the direction of "/" "\" staggered paving, modeling like a "human" character, splicing after the three-dimensional sense more significant, giving People a calm and elegant feeling, the overall effect is more creative sense.

Fishbone spelling floor is the diamond-shaped plate, the two ends of the floor are cut out 45 ° sharp angle, the short side of the pavement with the short side, with a clear central axis, and left and right reverse direction distribution on both sides of the central axis, shaped like a fishbone closely arranged. It shows the beauty of the line and the flowing flavor, which greatly enriches the sense of space hierarchy.

From the laying difficulty and loss, the herringbone spell in the laying needs to tip alignment. If the ability of the installer is not enough, not only can it not lay the beauty, but in later use is also very easy to warp the whole laying process down, causing material loss than other ordinary floorings, more costly materials. And herringbone spelling floor, although also waste work waste, but slightly better than the herringbone spelling floor.

The above is about the installation of waterproof herringbone vinyl flooring and the difference between it and herringbone flooring. If you need more detailed information, welcome to contact us!